Closed Dimensions: 12 1/2"W x 4 1/2"L x 8 1/4"H (31.8 cm x 11.4 cm x 21 cm) includes handle
Open Dimensions: 17"W x 12 1/2"L x 8 1/4"H (43.2 cm x 31.8 cm x 21 cm) includes handle
|Weight in lbs.||
Item Weight: 8.5 lbs. (3.9 kg)
Boxed Weight: 10.5 lbs. (4.8 kg)
|Fabric Layers Cut||Up to 6 layers of cotton fabric at a time|
|Number of Compatible Dies||More than 95|
|Warranty||Limited One Year|
GO! Baby Fabric Cutter Starter Set Includes:
Features and Benefits:
Most GO! Dies will Work with your GO! Baby Fabric Cutter
Die compatibility information is listed on all GO! die product pages and in our GO! Die and Fabric Cutter Compatibility Chart. To shop for Baby-compatible dies, see GO! Baby Dies.
The GO! Baby Fabric Cutter does not work with 10" x 10" or 10" x 24" GO! dies.
Place Layer die (with foam side up),
fabric and cuting mat.
For most accurate cuts, place
fabric on the lengthwise grain.
To conserve fabric, cover only
the shape to be cut, not the entire die board.
Push die, fabric and mat firmly
against roller. Roll through cutter.
Remove fabric and perfectly cut shapes! Repeat process.
*To conserve fabric, cover only the shape you want to cut--not the entire die board. For asymmetrical shapes, place fabric pattern side up if you want the shape to look exactly like the shape on the die. Place fabric pattern side down if you want the shape to be a mirror image of the shape on the die.
GO! Fabric Chart: Chart below is the recommend number of fabric layers; actual number of fabric layers will vary depending on fabric type and thickness.
|Cotton with Fusible Web||4|
Care & Maintenance: For best results, always keep your GO! Baby fabric cutter clean and lint free. To clean the fabric cutter inside and out, use a soft dry cloth. Avoid abrasives, solvents and spray cleaners. If necessary, wipe with a damp cloth, then polish with a dry cloth. Use canned air to clear lint from roller area. The GO! Baby fabric cutter does not have replacement parts.
Limited One-Year Warranty: We promise your personal AccuQuilt GO! Baby cutter will be free from defects in material or workmanship when used as directed. If you experience a manufacturing defect within one year after purchase, AccuQuilt will repair or replace the cutter at no charge. Improper use, excessive wear and tear caused by commercial use and/or damage caused by the user will void the warranty. This warranty covers only the cutting unit--not mats or dies. To receive a replacement unit, return the cutter to the place you purchased it.
Please log in or register a new customer account to write a review.
I bought the Baby Go because I didn't want to invest in the bigger machine not knowing what it was like. But cutting with it for the first time just made my jaw drop open! The cuts are so clean and clear that I am about to throw away my rotary cutter which has caused me nothing but misery. I've been hinting that I want the new bigger Cutter for Christmas so I hope my family will see the pictures I've posted all over the house of the double width and electrical machine. I have arthritis and I think this new machine would be great for my hands when pain levels are high. I can't recommend this machine enough and you should talk to Santa so he can leave one for you as well!
(Posted on 12/15/2014)
I got the Go! Baby fabric cutter because I wasn't too sure about this new craze. I had been doing the Block of the Month from the Quilt Show for 2012 Sedona Star. I didn't start it until sometime in 2013. It was designed by Sarah Vedelar (sp?) and she had a custom die that would work in the Go! Baby. I love it! I mostly use it to cut my scraps into usable pieces (think Bonnie Hunter Scrap Savers). I use the strip set for 1", 1 1/2", and 2" strips; I use the 3 1/2" squares; and the 6pack 2" squares the most. I will keep the Go! Baby for retreats and small jobs, but now I have the Studio cutter on my wish list!
(Posted on 11/12/2014)
The Go Baby is great for a "when I have a few spare minutes" type of quilter like me. I can cut the shapes I want accurately and in multiples and they're all ready to go when I am. The same holds true for applique shapes.
(Posted on 11/7/2014)
I really debated about buying the Go cutter and how economical I would consider it compared to cutting by hand. I took the plunge when I started cutting my scrap stash to put it in order and I haven't regretted the decision.
Hexagons in particular are easier and quicker to cut. I immediately bought a strip die and triangle die as well.
Much easier on my wrist and hand than extended use of the rotary cutter.
(Posted on 10/15/2014)
I LOVE my Go Baby- It's so much faster than cutting by hand and AccuQuilt worked great with me to create a custom die!
(Posted on 9/25/2014)
I had never quilted before in my life & I was terrified of the rotary cutter and making templates, etc. - so my thoughtful husband purchased the Go! Baby for me for my birthday, along with a tote to take to my office where I sneak in some quilting at lunch, some dies & mats and a few assorted accessories! I found the Go! Baby so easy to use and so much fun too! I have even ordered my own custom die! Great job Accu-Quilt! Thanks for taking the stress out of what should be fun! I can't wait to graduate to the Go!
(Posted on 9/18/2014)
I just began quilting and found the Go! Baby a wonderful friend to have around. Since all of my quilting is being done by hand and I just don't really have a great relationship with my rotary cutter, I save lots of time and frustration with my Go! Baby! Can't wait to upgrade to the Go! :-)
(Posted on 9/18/2014)
This Go Baby is just what I was looking for to speed along the paper piecing process. Perfect for getting those hexagons cut!
(Posted on 9/13/2014)
I bought the GO baby because I have bursitis and tendonitis in my shoulder, so when I have a flare up, cutting with scissors or a rotary cutter can be painful. I decided to try the baby GO to see if cranking the handle would cause a problem with my shoulder. So far so good! My only regret is that I didn't get the full size GO, but now I know what I am going to put on the top of my Christmas list.
(Posted on 8/19/2014)
Saw this in my quilting magazine today and I immediately looked into it. This seems like the perfect invention for me as I don't have a lot of space and I enjoy quilting. Cant wait to get mine!
(Posted on 7/9/2014)
In stock items will ship within 1-2 business days if ordered before 12:00 p.m. CST Mon-Fri. Most in-stock items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.
Please note that deadlines for certain items, including Deluxe Cutting Cabinets (SKU 50903), are different than those of general merchandise as those items cannot be expedited. To make sure your gift selection can arrive on time, always check the Shipping tab located at the bottom of the specific product page.
The shipping time frames above apply to in-stock merchandise delivered to the contiguous United States, and does not include Alaska, Hawaii or APO/FPO addresses.
Backordered items are currently out of stock, but are available for purchase now. Your entire order will ship with the backordered item when stock is replenished... usually within 20 business days.
Pre-Order items will ship as indicated on the product page. Your credit card, with the exception of PayPal, will not be charged until the order ships. Once shipped, your items will arrive at your U.S. address within 3-8 business days (Ground Shipping).