|Cutter Included||GO! Baby Fabric Cutter|
|Number of Dies Included||2 Dies|
|Also Included||GO! Baby Tote (55301) and GO! Cutting Mats (6" x 12" and 6" x 24")|
|Weight in lbs.||15.82|
|Warranty||Limited One Year|
The GO! Baby Bundle of Joy Starter Set includes:
Most GO! Dies will work with your GO! Baby Fabric Cutter
Die compatibility information is listed on all GO! die product pages. To shop for Baby-compatible dies, see the GO! Baby Dies category within the GO! Shop. The GO! Baby Fabric Cutter does not work with 10" x 10" or 10" x 24" GO! dies.
Place die on cutter FOAM SIDE
UP. Place fabric on top of die.*
Place cutting mat on top of fabric.
Push die, fabric and mat firmly
against roller. Turn handle in
direction you want the die to go.
Remove mat, die-cut shape
and excess fabric. Add new
fabric and cutting mat on
top of die. Repeat process
from opposite side. No need
to handle die between cuts!
GO! Baby Fabric Chart: Chart below is the recommend number of fabric layers; actual number of fabric layers will vary depending on fabric type and thickness.
Care & Maintenance: For best results, always keep your GO! Baby cutter clean and lint free. To clean the cutter inside and out, use a soft dry cloth. Avoid abrasives, solvents and spray cleaners. If necessary, wipe with a damp cloth, then polish with a dry cloth. Use canned air to clear lint from roller area. The GO! Baby fabric cutter does not have replacement parts.
Limited One-Year Warranty: We promise your personal AccuQuilt GO! Baby cutter will be free from defects in material or workmanship when used as directed. If you experience a manufacturing defect within one year after purchase, AccuQuilt will repair or replace the cutter at no charge. Improper use, excessive wear and tear caused by commercial use and/or damage caused by the user will void the warranty. This warranty covers only the cutting unit--not mats or dies. To receive a replacement unit, return the cutter to the place you purchased it.
In stock items will ship within 1-2 business days if ordered before 12:00 p.m. CST Mon-Fri. Most in-stock items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.
Please note that deadlines for certain items, including Deluxe Cutting Cabinets (SKU 50903), are different than those of general merchandise as those items cannot be expedited. To make sure your gift selection can arrive on time, always check the Shipping tab located at the bottom of the specific product page.
The shipping time frames above apply to in-stock merchandise delivered to the contiguous United States, and does not include Alaska, Hawaii or APO/FPO addresses.
Backordered items are currently out of stock, but are available for purchase now. Your entire order will ship with the backordered item when stock is replenished... usually within 20 business days.