The GO! Mix & Match 8" Starter Set includes:

• GO! Baby Fabric Cutter (55300)
• GO! Quarter Square 4" Finished Triangle (55316)
• GO! Square-3 1/4" (55317)
• GO! Parallelogram-2 3/4" x 2 1/2" (55318)
• GO! Value Die (55018)
• GO! Half Square-4" Finished Triangle (55031)
• GO! Strip Cutter-2 1/2" 2-Strips (55014)
• GO! Cutting Mat-6" x 12" (55112)
• GO! Cutting Mat-6" x 24" (55138)
• GO! Cutting Mat-5" x 10" (55110)

Most GO! Dies will Work with your GO! Baby Fabric Cutter
Die compatibility information is listed on all GO! die product pages. To shop for Baby-compatible dies, see the GO! Baby Dies category within the GO! Shop. The GO! Baby Fabric Cutter does not work with 10" x 10" or 10" x 24" GO! dies.

Die Tips:

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
• Use cutting mats that matches size of each die.
• For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
• Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
• Some dies feature specially designed corners to aid in alignment and pre-cutting.
• For fast applique, apply fusible web to fabrics, then cut shapes with dies.
• Use good quality fabric to reduce fabric stretch.
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.

Care & Maintenance: Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.

Warranty: AccuQuilt GO! dies are guaranteed for one year.