GO! Stems & Leaves

Was $44.99

Now $39.99

In stock & ready to ship

Get 40 Rewards Points

Quick Overview

Let your creativity flower. The GO! Stems and Leaves die lets you create a whole jungle-full of flowers and vines in a flash. It precisely cuts three different stems and six sizes of leaves in a variety of shapes. Multiple layers of fabric is no problem for the razor sharp, yet ultra-safe, blades on this cutter. Use the versatile leaves as flower petals or combine stems to make them longer and cover the overlapped areas with leaves. Make a quick applique by applying fusible web to the wrong side of fabric, then cut shapes with this die.

Compatible with these fabric cutters:

*Must use with GO! Die Adapter

GO! Stems & Leaves (55331)

More Views


GO! Stems & Leaves is a versatile die that can be used to make an assortment of organic shapes. This die cuts three different stem shapes and six leaf shapes in just seconds with your GO! Fabric Cutter. Add fusible web for easy appliques or combine with other shapes for an original design.

Use GO! dies with your GO! and GO! Baby Fabric Cutters to cut precise, accurate shapes in just seconds.

Features and Benefits:

  • Cut so much more in less time—Cut up to 6 layers of 100% cotton fabric at once
  • Easiest to use—Simply place die on cutter, then fabric and cutting mat on top
  • Get accurate cuts every time—No slipping rulers or mistakes
  • Create quilts you never thought you would—AccuQuilt makes cutting curvy classic quilt patterns a snap
  • Save fabric with Two Tone Foam—Get more out of your fabric by placing it only over the shape you want to cut
  • Safe to use—No blades come anywhere near your fingers
  • No more math—Geometric shapes are designed with an accurate 1/4" seam allowance in the design
  • Quilt more, clip less—No more clipping all those dog-eared corners
  • Quick and easy applique—Apply fusible web to fabric prior to cutting

Storage: Organize GO! dies with AccuQuilt GO! Die Storage Rack (55115).

Care & Maintenance: Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.

Die Tips:

  • With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
  • Use cutting mats that matches size of each die.
  • For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
  • Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
  • Some dies feature specially designed corners to aid in alignment and pre-cutting.
  • For fast applique, apply fusible web to fabrics, then cut shapes with dies.
  • Use good quality fabric to reduce fabric stretch.
  • It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.

Warranty: AccuQuilt GO! dies are guaranteed for one year.

Details and Dimensions
Designer AccuQuilt
Compatible Fabric Cutter GO! Baby Fabric Cutter (55600), GO Fabric Cutter (55100S), GO Big Electric Fabric Cutter (55500), Studio 2 Fabric Cutter (50450), Studio Fabric Cutter (50800)
Cutting Mat/Plastic Required GO! Cutting Mat, 6 in. x 12 in. (15.2 cm x 30.4 cm) Item 55112
Cut Size 1 9/16"W x 6 11/16"H stem, 1 15/16"W x 7 11/16"H stem, 7/8"W x 7 5/8"H stem, 3/4"W x 2"H leaf, 9/16"W x 2 3/4"H leaf, 11/16"W x 3 5/8” leaf, 1 3/8"W x 3 3/8"H leaf, 15/16"W x 2"H , and 9/16"W x 1 7/16"H leaf
Finished Size 1 9/16"W x 6 11/16"H stem, 1 15/16"W x 7 11/16"H stem, 7/8"W x 7 5/8"H stem, 3/4"W x 2"H leaf, 9/16"W x 2 3/4"H leaf, 11/16"W x 3 5/8” leaf, 1 3/8"W x 3 3/8"H leaf, 15/16"W x 2"H , and 9/16"W x 1 7/16"H leaf
Die Board Size 6 in. x 12 in. (15.2 cm x 30.4 cm)
Item 55331
Weight in lbs. 1.21
Brand AccuQuilt
Warranty Limited One Year

In stock items will ship within 2 business days if ordered before 12:00 p.m. CST Mon-Fri. Most in-stock items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.

Please note that deadlines for certain items, including Deluxe Cutting Cabinets (SKU 50903), are different than those of general merchandise as those items cannot be expedited. To make sure your gift selection can arrive on time, always check the Shipping tab located at the bottom of the specific product page.

The shipping time frames above apply to in-stock merchandise delivered to the contiguous United States, and does not include Alaska, Hawaii or APO/FPO addresses.

Studio Backordered items are currently out of stock, but are available for purchase.  Your entire order will ship with the backordered item(s) within 12 business days.

Pre-Order items will ship as indicated on the product page. Once shipped, your items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.

Help & Guides

Customer Reviews

Overall Rating

Get 10 Rewards Points for rating this product.
Items Per Page
  • Janet · 7/14/2017

    Wonderful appliqué

    This adds so many possibilities for appliqués when combined with the Edita flower die. There are endless variations.

  • Marty · 4/27/2017

    adding beauty to your flowers.

    this is perfect for the stems of your flowers. but also great if you are using an ocean scene.

  • Linda · 1/31/2017


    These are great for making home decor (i.e. pillows, table runners, quilts, placemats, etc.). So easy to make accurate cuts and with the Embrilliance Software that I purchased makes appliquéing a breeze!!!

  • Cherri · 1/28/2017


    I love this die flor my flower garden wall hanging.

  • Enid · 1/16/2017

    great for using in Baltimore type applique blocks

    This die is great for using in Baltimore type applique blocks, along with the Rose of Sharon 1 and 2 dies. Makes beautiful stems.

  • Helen · 12/14/2016

    Highly recommend

    Wonderful to have stems and leaves to mix and match with my flower dies!

  • willa · 12/2/2016

    Used this die a lot, love it.

    I recently ordered Go, Stems and Leaves to be used with the Tulip Die.I found this die to be exactly what I need to make a perfect looking tulip for my project. I really love this die and I can used it with other flower dies.

  • Jeanne · 10/20/2016

    great die

    This die workes wonderful with all the flower dies and if you need leaves for any project. As i have said befor the dies are also great for scarp booking .

  • Froggie · 9/28/2016

    Pairing up dies

    This die is so great to pair up with any of the flower dies AND, even better, to pair up with Edyta's Serendipity Qube!!!

  • Gwen · 3/14/2016

    Flowers and stems

    This would be good to use if you wanted to put fusible web on the back. Normally the stems are really skinny and having this die will avoid all the tracing and drawing and still have to cut.