Lay die flat inside tray with FOAM SIDE UP. Layer die, fabric and cutting plastic. For most accurate cuts, place
fabric on the lengthwise grain.
To conserve fabric, cover only shape to be cut, not entire die board.

Push tray, die, fabric and plastic firmly against roller.
Turn handle
in direction you want die to
go. Roll through cutter.

Remove cutting plastic and
perfectly cut shapes. Occasionally,
threads may need to be snipped
where cutting blades meet
on the die. Repeat process
from opposite direction.

Lay die flat inside tray with FOAM SIDE UP. Layer die, fabric and cutting plastic. For most accurate cuts, place
fabric on the lengthwise grain.
To conserve fabric, cover only shape to be cut, not entire die board.

Push tray, die, fabric and plastic firmly against roller.
Turn handle
in direction you want die to
go. Roll through cutter.

 

Remove cutting plastic and
perfectly cut shapes. Occasionally,
threads may need to be snipped
where cutting blades meet
on the die. Repeat process
from opposite direction.

 

Storage: Store Studio dies in AccuQuilt die storage cases or storage racks.

Studio Fabric Chart: Chart below is the recommend number of fabric layers; actual number of fabric layers will vary depending on fabric type and thickness.

Care & Maintenance: Cutter For best results, always keep your Studio 2 fabric cutter clean and lint free. To clean the fabric cutter inside and out, use a soft dry cloth. Avoid abrasives, solvents and spray cleaners. If necessary, wipe with a damp cloth, then polish with a dry cloth. Use canned air to clear lint from roller area. The steel roller never needs replacing and withstands years of die cutting use. Please note: Some assembly is required when first setting up your Studio 2 Fabric Cutter.

Care & Maintenance: Dies Use adhesive roller to clean lint and thread from dies. After each use, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick (55105). Die blades never need to be sharpened.

Warranty: AccuQuilt Studio 2 Fabric Cutters have a three (3) year guarantee. If you experience any defects in material or workmanship, simply notify AccuQuilt and we will repair or replace the fabric cutter at no charge. All fabric cutter die trays and cutting plastic are consumable parts and are not covered by the warranty. Replace trays annually depending on use. All Studio dies are guaranteed for one year.