- Details
-
Skill Level N/A Designer AccuQuilt Compatible Fabric Cutter Studio Fabric Cutter (50800) Cutting Mat/Plastic Required Cutting Plastic, 10" x 15" (25.4 cm x 38.1 cm) Item 60003 Cut Size 6 on die; 1 1/2" x 1 1/2" finished size; 2 1/4" x 2 13/16" edges with 1 1/2" x 2 1/8" finished side edges Finished Size Finished size; 2 1/4" x 2 13/16" edges with 1 1/2" x 2 1/8" finished side edges Die Board Size Super Jumbo, 10" x 15" (25.4 cm x 38.1 cm) Item 50787 Weight in lbs. 0.75 Brand AccuQuilt Warranty Limited One Year - Description
-
Parallelograms add a great twist to quilt designs. Use for star points, ribbon twist borders, pieced borders and more. This parallelogram shape has been designed to mix and match with additional AccuQuilt Studio dies to create 6" blocks. A few of the blocks featuring this parallelogram include Flying Triangles and Wind Blown Square.
Die Specifications:
- Compatible with Studio Fabric Cutter (50800)
- Required: Super Jumbo Cutting Plastic (60003) Cuts six 1 1/2" x 1 1/2" finished size; 2 1/4" x 2 13/16" edges with 1 1/2" x 2 1/8" finished side edges.
Storage: Store Studio dies in AccuQuilt die storage cases or storage racks.
Die Tips:
- With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
- Use cutting plastic that matches size of each die.
- For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
- Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
- Some dies feature specially designed corners to aid in alignment and pre cutting.
- For fast applique, apply fusible web to fabrics, then cut shapes with dies.
- Use good quality fabric to reduce fabric stretch.
- It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.
Care & Maintenance: Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.
Warranty: AccuQuilt Studio dies are guaranteed for one year.
- Projects
-
Create something special with GO! Patterns and Projects:
- Reviews
- Help & Guides
- Shipping
-
In stock items will ship within 1-2 business days if ordered before 12:00 p.m. CST Mon-Fri. Most in-stock items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.
Please note that deadlines for certain items, including Deluxe Cutting Cabinets (SKU 50903), are different than those of general merchandise as those items cannot be expedited. To make sure your gift selection can arrive on time, always check the Shipping tab located at the bottom of the specific product page.
The shipping time frames above apply to in-stock merchandise delivered to the contiguous United States, and does not include Alaska, Hawaii or APO/FPO addresses.
Related Products
Check items to add to the cart or select all
