|Model||GO! Baby Fabric Cutter|
|Dimensions||12" W x 4.5" L x 8.25" H|
|Weight in lbs.||8.5|
|Fabric Layers Cut||Up to 6 layers of cotton fabric at a time|
|Number of Compatible Dies||43|
|Warranty||Limited One Year|
Fabric Cutter Specifications, Features & Benefits:
Most GO! Dies will Work with your GO! Baby Fabric Cutter
Die compatibility information is listed on all GO! die product pages and in our GO! Die and Fabric Cutter Compatibility Chart. To shop for Baby-compatible dies, see GO! Baby Dies.
The GO! Baby Fabric Cutter does not work with 10" x 10" or 10" x 24" GO! dies.
Place die on cutter FOAM SIDE
UP. Place fabric on top of die.*
Place fabric cutting mat on top of fabric.
Push die, fabric and mat firmly
against roller. Turn handle in
direction you want the die to go.
Remove fabric cutting mat, die-cut shape
and excess fabric. Add new
fabric and cutting mat on
top of die. Repeat process
from opposite side. No need
to handle die between cuts!
*To conserve fabric, cover only the shape you want to cut--not the entire die board. For asymmetrical shapes, place fabric pattern side up if you want the shape to look exactly like the shape on the die. Place fabric pattern side down if you want the shape to be a mirror image of the shape on the die.
GO! Fabric Chart: Chart below is the recommend number of fabric layers; actual number of fabric layers will vary depending on fabric type and thickness.
|Cotton with Fusible Web||4|
Care & Maintenance: For best results, always keep your GO! Baby fabric cutter clean and lint free. To clean the fabric cutter inside and out, use a soft dry cloth. Avoid abrasives, solvents and spray cleaners. If necessary, wipe with a damp cloth, then polish with a dry cloth. Use canned air to clear lint from roller area. The GO! Baby fabric cutter does not have replacement parts.
Limited One-Year Warranty: We promise your personal AccuQuilt GO! Baby cutter will be free from defects in material or workmanship when used as directed. If you experience a manufacturing defect within one year after purchase, AccuQuilt will repair or replace the cutter at no charge. Improper use, excessive wear and tear caused by commercial use and/or damage caused by the user will void the warranty. This warranty covers only the cutting unit--not mats or dies. To receive a replacement unit, return the cutter to the place you purchased it.
I am loving my go baby cutter. I am able to use dies to more easily make shapes that I would not normally make and it is taking my quilting to another level. I recently have been able to complete a triangles quilt as well as a clamshell quilt -- love it. I only gave it 4 stars because you are limited on the dies that you can use and i wish I had gotten the standard accucutter instead. It's super easy to use and would be great for applique projects.
(Posted on 4/9/14)
I just bought this cutter earlier this month and couldn't be more happier. I've always wanted to quilt, but trying to cut accurate squares have me scared. I can't cut a straight line to save my life!! I've had to buy a special tote to hold all the pieces I've cut for the scrappy quilts and curtains I plan on making. Now I just need to decide what die I want to get next.
Thank you Accuquilt for a wonderful machine!!!!
(Posted on 3/15/14)
but makes cutting blocks for quilts so much easier
(Posted on 2/5/14)
I have been quilting for the past 15 years And this is a wonderful addition to my life. I am new to the accuquilt products and I am amazed at how easy and quickley it makes it to cut the pieces of my quilt. I will recommend this product to everyone who quilts. Thank you.
(Posted on 2/5/14)
This is such a great machine for helping anyone to cut out their pieces for quilting and applique. I have cut out my pieces and package as a kit, then when I'm ready to sew it up it is all ready for me. It saves alot of time and energy. Easy to use, takes up little space and can travel with me anywhere.. Love it.
(Posted on 1/27/14)
After using the Go Baby Cutter for 2 months, I like it even better than before. I think I'm spoiled. I would not change the design that has the little parts (such as the dog ears) on the die. I watched the youtube video several times which really helped. Also, I called customer service because the 5 1/2 inch squares were not true to size. I learned that straight grain is important. The representative was courteous and very helpful. She suggested that I cut a paper square to determine if the die was damaged or if grain was the issue. I love cutting small squares with the cutter. It is a big time saver. I think the larger cutter would be great, one could cut 6 1/2 inch squares and many strips at once. As others have commented, it does seem expensive. That is why I have waited several years to purchase one. I love it though and I am making a gingham dog and heart quilt.
(Posted on 1/26/14)
I received my new Go Baby around noon and by 2:00 I had cut about a bazillion tumbler pieces from scraps. It is so simple to use and it works great! I highly recommend it. Can't wait to get some more dies. I can really crank out the quilts now!!
(Posted on 1/2/14)
I ordered the Go! Baby cutter and a few dies in late November 2013.
I have used it several times. I'm happy that I bought the Go Baby rather the expensive Go Cutter. I am a hobby quilter and have a small room set aside for my computer and sewing crafts. The Go Baby Cutter stores easily on my cutting table is not heavy too heavy to move around, and I paid the right price. It does a great job cutting and is easy to use. I have used it for cutting squares and appliques. I really like the way the dog and cat dies are designed, but I don't like the combination dies such as the bear and duck because I usually do not want to use the same fabrics for these. I hate the small pieces, such as the bowtie, eye and bear pads. They will be the same color as the bear or duck and will not show up. Therefore, you have to waste some fabric by cutting everything again on a different color. I think a separate die for the small accent pieces would be a big improvement. I don't have the patience for the small eyes. I used a decorative stitch on my machine. Overall, I am very happy with my purchase, and I think I will have a fun time using them on cute projects. My suggestion for the company is to develop additional applique dies for the Go! Baby. I would love to have a frog, bigger monkey, pig, and horse die.
(Posted on 12/30/13)
I have arthritis and cutting can be hard, even with ergonomic rotary cutters. Go baby was a wonderful surprise. The machine itself feels nice and solid without being heavy. Go baby is easy to use and the cuts are exact. I don't have many dies yet but I plan to acquire more.
(Posted on 12/29/13)
My Go! Baby cut enough 5" squares for a queen quilt top in a little over an hour! I had my fabric ready to go - folded and ironed in 6 layers. I am hooked! Go-Go! Baby! Can't wait to get this quilt done, so I can cut some more!
(Posted on 8/17/13)
In stock items will ship within 1-2 business days if ordered before 12:00 p.m. CST Mon-Fri. Most in-stock items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.
Please note that deadlines for certain items, including Deluxe Cutting Cabinets (SKU 50903), are different than those of general merchandise as those items cannot be expedited. To make sure your gift selection can arrive on time, always check the Shipping tab located at the bottom of the specific product page.
The shipping time frames above apply to in-stock merchandise delivered to the contiguous United States, and does not include Alaska, Hawaii or APO/FPO addresses.
Backordered items are currently out of stock, but are available for purchase now. Your entire order will ship with the backordered item when stock is replenished... usually within 20 business days.