|Dimensions||12" W x 4.5" L x 8.25" H|
|Weight in lbs.||8.5|
|Fabric Layers Cut||Up to 6 layers of cotton fabric at a time|
|Number of Compatible Dies||More than 95|
|Warranty||Limited One Year|
GO! Baby Fabric Cutter Starter Set Includes:
Features and Benefits:
Most GO! Dies will Work with your GO! Baby Fabric Cutter
Die compatibility information is listed on all GO! die product pages and in our GO! Die and Fabric Cutter Compatibility Chart. To shop for Baby-compatible dies, see GO! Baby Dies.
The GO! Baby Fabric Cutter does not work with 10" x 10" or 10" x 24" GO! dies.
Place die on cutter FOAM SIDE
UP. Place fabric on top of die.*
Place fabric cutting mat on top of fabric.
Push die, fabric and mat firmly
against roller. Turn handle in
direction you want the die to go.
Remove fabric cutting mat, die-cut shape
and excess fabric. Add new
fabric and cutting mat on
top of die. Repeat process
from opposite side. No need
to handle die between cuts!
*To conserve fabric, cover only the shape you want to cut--not the entire die board. For asymmetrical shapes, place fabric pattern side up if you want the shape to look exactly like the shape on the die. Place fabric pattern side down if you want the shape to be a mirror image of the shape on the die.
GO! Fabric Chart: Chart below is the recommend number of fabric layers; actual number of fabric layers will vary depending on fabric type and thickness.
|Cotton with Fusible Web||4|
Care & Maintenance: For best results, always keep your GO! Baby fabric cutter clean and lint free. To clean the fabric cutter inside and out, use a soft dry cloth. Avoid abrasives, solvents and spray cleaners. If necessary, wipe with a damp cloth, then polish with a dry cloth. Use canned air to clear lint from roller area. The GO! Baby fabric cutter does not have replacement parts.
Limited One-Year Warranty: We promise your personal AccuQuilt GO! Baby cutter will be free from defects in material or workmanship when used as directed. If you experience a manufacturing defect within one year after purchase, AccuQuilt will repair or replace the cutter at no charge. Improper use, excessive wear and tear caused by commercial use and/or damage caused by the user will void the warranty. This warranty covers only the cutting unit--not mats or dies. To receive a replacement unit, return the cutter to the place you purchased it.
Please log in or register a new customer account to write a review.
This Go Baby is just what I was looking for to speed along the paper piecing process. Perfect for getting those hexagons cut!
(Posted on 9/13/14)
I bought the GO baby because I have bursitis and tendonitis in my shoulder, so when I have a flare up, cutting with scissors or a rotary cutter can be painful. I decided to try the baby GO to see if cranking the handle would cause a problem with my shoulder. So far so good! My only regret is that I didn't get the full size GO, but now I know what I am going to put on the top of my Christmas list.
(Posted on 8/20/14)
Saw this in my quilting magazine today and I immediately looked into it. This seems like the perfect invention for me as I don't have a lot of space and I enjoy quilting. Cant wait to get mine!
(Posted on 7/9/14)
Bought a Go Baby and about 2 months later upgraded to a Go. So many more die choices. I love them both. Highly recommend all accuquilt products.
(Posted on 7/4/14)
Would make cutting for quilting ever so much more perfect ! I love it :)
(Posted on 6/11/14)
I purchased this die as an addition to my sewing room. I have a larger die cutter in another room for cutting strips and cross-cutting them once sewn together. I was running myself back and forth for small quantities of cutting. The compact design fits easily on my big board ironing board and the dies run through very smoothly. Will be recommending this product to others.
(Posted on 5/22/14)
I love this little Go Baby Cutter. I don't have a lot of space on my cutting table but this fits perfectly right in the middle. Most of the dies I would use would fit the baby and so opted for this instead of the bigger Go! I love it! Sent time this weekend cutting out bricks. Can't wait to tackle some 2.5inch strips!
(Posted on 5/12/14)
I am fortunate to have a quilting room and a sewing room albeit on two different floors of my house. My studio cutter is in the quilting room and I make good use of it. However there are times when I'm in the sewing room and I need to make a few cuts. When the Go Baby went on sale I purchased it along with some dies and the studio adapter. Now I don't need to climb the stairs for a small job and my studio die library has expanded to include the go dies too. The Baby is cute, fits in a cabinet when sleeping and does the same quality of work as her big Momma.
(Posted on 5/7/14)
I already own the Go. But I am thinking about buying this machine to take to classes and crafting get togethers. Thanks Accuquilt for giving us these great machines!
(Posted on 5/6/14)
I am loving my go baby cutter. I am able to use dies to more easily make shapes that I would not normally make and it is taking my quilting to another level. I recently have been able to complete a triangles quilt as well as a clamshell quilt -- love it. I only gave it 4 stars because you are limited on the dies that you can use and i wish I had gotten the standard accucutter instead. It's super easy to use and would be great for applique projects.
(Posted on 4/9/14)
In stock items will ship within 1-2 business days if ordered before 12:00 p.m. CST Mon-Fri. Most in-stock items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.
Please note that deadlines for certain items, including Deluxe Cutting Cabinets (SKU 50903), are different than those of general merchandise as those items cannot be expedited. To make sure your gift selection can arrive on time, always check the Shipping tab located at the bottom of the specific product page.
The shipping time frames above apply to in-stock merchandise delivered to the contiguous United States, and does not include Alaska, Hawaii or APO/FPO addresses.
Backordered items are currently out of stock, but are available for purchase now. Your entire order will ship with the backordered item when stock is replenished... usually within 20 business days.
Pre-Order items will ship as indicated on the product page. Once shipped, your items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.