With Sides Down: 24 3/4"W x 30 1/4"L x 8 3/4"H (including handle), 21"W x 30 1/4"L x 8 3/4"H (not including handle)
With Sides Up: 24 3/4"W x 11"L x 14 3/4"H (including Handle), 21" x 11" x 14 3/4" (not including
|Weight in lbs.||Machine Only: 32 lbs., Boxed weight: 42 lbs.|
|Fabric Layers Cut||Up to 10 layers of cotton fabric at a time|
|Number of Compatible Dies||Over 350 Studio dies + Over 200 GO! Dies (with GO! Die Adapter for Studio)|
|Warranty||Limited Three Year Warranty|
Fabric Cutter Includes:
Features and Benefits:
Lay die flat inside tray with FOAM SIDE UP. Layer die, fabric and cutting plastic. For most accurate cuts, place
fabric on the lengthwise grain.
To conserve fabric, cover only shape to be cut, not entire die board.
Storage: Store Studio dies in AccuQuilt die storage cases or storage racks.
Studio Fabric Chart: Chart below is the recommend number of fabric layers; actual number of fabric layers will vary depending on fabric type and thickness.
|Cotton with Fusible Web||4-6|
Care & Maintenance: Cutter For best results, always keep your Studio 2 fabric cutter clean and lint free. To clean the fabric cutter inside and out, use a soft dry cloth. Avoid abrasives, solvents and spray cleaners. If necessary, wipe with a damp cloth, then polish with a dry cloth. Use canned air to clear lint from roller area. The steel roller never needs replacing and withstands years of die cutting use. Please note: Some assembly is required when first setting up your Studio 2 Fabric Cutter.
Care & Maintenance: Dies Use adhesive roller to clean lint and thread from dies. After each use, remove any threads imbedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick (55105). Die blades never need to be sharpened.
Warranty: AccuQuilt Studio 2 Fabric Cutters have a three (3) year guarantee. If you experience any defects in material or workmanship, simply notify AccuQuilt and we will repair or replace the fabric cutter at no charge. All fabric cutter die trays and cutting plastic are consumable parts and are not covered by the warranty. Replace trays annually depending on use. All Studio dies are guaranteed for one year.
Please log in or register a new customer account to write a review.
In stock items will ship within 1-2 business days if ordered before 12:00 p.m. CST Mon-Fri. Most in-stock items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.
Please note that deadlines for certain items, including Deluxe Cutting Cabinets (SKU 50903), are different than those of general merchandise as those items cannot be expedited. To make sure your gift selection can arrive on time, always check the Shipping tab located at the bottom of the specific product page.
The shipping time frames above apply to in-stock merchandise delivered to the contiguous United States, and does not include Alaska, Hawaii or APO/FPO addresses.
Backordered items are currently out of stock, but are available for purchase now. Your entire order will ship with the backordered item when stock is replenished... usually within 20 business days.
Pre-Order items will ship as indicated on the product page. Your credit card, with the exception of PayPal, will not be charged until the order ships. Once shipped, your items will arrive at your U.S. address within 3-8 business days (Ground Shipping).