Quickly and easily cut perfect 1" strips for borders, sashing and more. Die blades are open at both ends to allow cutting of fabric that is still folded as it comes off the bolt. Lay cut strips across die perpendicular to blades to cut squares or rectangles.

GO! Die to Try
This die is part of the 'GO! Die to Try' program. In this program, new die designs are tested to measure consumer interest and ultimately determine which designs will become permanent members of the GO! product line. GO! Die to Try dies are only available on accuquilt.com.

Die Specifications:

• Compatible with: AccuQuilt GO! (55100) or GO! Baby (55300) Fabric Cutter
• Required (not included with die): 6" x 24" cutting mat (55138)
• Cuts five 1" (2.5 cm) strips

Storage: Organize GO! dies with AccuQuilt GO! Die Storage Rack (55115).

Die Tips:

• Cut up to 6 layers of cotton fabric at a time. For thicker fabrics, start with fewer layers and build up.
• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
• Use cutting plastic that matches size of each die.
• For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
• Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
• Some dies feature specially designed corners to aid in alignment and pre-cutting.
• For fast applique, apply fusible web to fabrics, then cut shapes with dies.
• Use good quality fabric to reduce fabric stretch.
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.

Care & Maintenance: Use adhesive roller to clean lint and thread from dies. After each use, with the die pick provided with the cutter, remove any threads embedded between blades and foam. It's normal for threads to get caught where blades meet in a die. Remove with tweezers or die pick. Die blades never need to be sharpened.

Warranty: AccuQuilt GO! dies are guaranteed for one year.