Christmas in July Savings are Happening Now!

Rating:
100% of 100

Bullseye Tumblers-Odd-1", 3", 5", 7" Finished for Studio

#
50366
190
Info

AccuQuilt Rewards is FREE.

  • Earn Reward Points for orders placed, reviewing products and referring friends.
  • Redeem Reward Points for discounts on future purchases.
Learn More about AccuQuilt Rewards.
compatible with Studio 2 fabric cutter
InfoWarning

Sign up for a Free account to easily see which dies are compatible with your cutter!

Cutter Compatibility

This die is compatible with these cutters:

Create Free Account
$190.00
+
-
 
WISHLIST

Made-To-Order 
Allow up to 10 business days to manufacture.

Bullseye Value
Compare to $150 (if dies sold separately)

Tumblers are a dream to piece, and cutting them with your Studio Bullseye™ dies is a breeze too! Enjoy four different sizes in the set, all designed with dog-eared corners for easy alignment while sewing. Team them up with the Bullseye Tumblers-Even Set (50367) for more variety!

Learn How to Use this Bullseye Die

AQ Cutting Mat Required: Cutting Plastic, 10 in. x 12 in. (25.4 cm x 30.5 cm) Item 60002 and Cutting Plastic, 5" x 6" (12.7 cm x 15.2 cm) Item 60000

Die Specifications:

  • Compatible Fabric Cutter: Studio Fabric Cutter (50800)
  • Recommended Studio Cutting Plastics: Jumbo (10" x 12") (60002) and Mini, Small, Large (5" x 6") (60000)
  • Tumbler sizes included in set: 1", 3", 5", 7"
  • Coordinates with: Bullseye Tumblers-Even-2", 4", 6", 8" for Studio (50367)

How to Cut Tumblers:

  1. Select tumbler size.
  2. Take the blade board that corresponds with the tumbler size you wish to cut.
  3. Place the blade board in your Studio™ die tray, FOAM SIDE UP. For most accurate cuts, arrange the tumbler dies in the corner of the cutting tray, at a slight angle with the die touching two sides of the tray.
  4. Take the inner foam boards and fill in the center of the blade board.
  5. Take the foam board that is one size larger than your blade board and place it as the outer ring.
  6. Apply fusible web if desired. Layer or fanfold your fabric. You can cut up to 10 layers of 100% cotton fabric at a time.
  7. TIPS: Fusible web counts as one half layer of fabric. Remember to position the fabric on the lengthwise grain, with the selvage edge towards the Studio handle, as it goes under the roller.
  8. Place your Studio Cutting Plastic on top.
  9. Roll through the Studio Fabric Cutter.

Die Tips:

  • For most accurate cuts, arrange the dies in the corner of the cutting tray.
  • With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
  • For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.
  • Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
  • For fast applique, apply fusible web to fabrics, then cut shapes with dies.
  • Use good quality fabric to reduce fabric stretch.
  • It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.

Use adhesive roller or die pick to clean lint and thread from dies. Die blades never need to be sharpened.

AccuQuilt Bullseye Dies for Studio Dies are guaranteed for one year.

In stock items will ship within 2 business days if ordered before 12:00 p.m. CST Mon-Fri. Most in-stock items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.

Please note that deadlines for certain items, including Deluxe Cutting Cabinets (SKU 50903), are different than those of general merchandise as those items cannot be expedited. To make sure your gift selection can arrive on time, always check the Shipping tab located at the bottom of the specific product page.

The shipping time frames above apply to in-stock merchandise delivered to the contiguous United States, and does not include Alaska, Hawaii or APO/FPO addresses.

Studio Backordered items are currently out of stock, but are available for purchase.  Your entire order will ship with the backordered item(s) within 10 business days.

Pre-Order items will ship as indicated on the product page. Once shipped, your items will arrive at your U.S. address 3-8 business days (Ground Shipping) after your order is shipped.

REVIEWS (7)
Get 10 AQ Reward Points for reviewing this product!
AccuQuilt Rewards are FREE
Only registered users can write reviews. Please Sign in or create an account